Hardware specifications
Radio
Dual-radio dual-band:
Radio 1: 2.4G 11ax/5G 11ax: 2×2 MIMO
Radio 2: 5G 11ax: 2x2 MIMO
Protocol
Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac
Operating Bands
802.11b/g/n/ax :2.4G ~ 2.483GHz
802.11a/n/ac/ax : 5.150~5.350GHz,5.47~5.725GHz,5.725~5.850GHz (vary depending on different countries)
Spatial Streams
Up to 4: 2×2:2 in 2.4GHz , 2×2:2 in 5GHz
Max Throughput
Maximum throughput (5G+5G mode) per AP: 2.4Gbps
Radio1:5G low band 1.2Gbps
Radio2:5G high band 1.2Gbps
2.4G+5G operation mode, maximum throughput per AP: 1.775Gbps
Radio1:2.4G 0.574Gbps
Radio2:5G 1.2Gbps
Modulation
OFDM:BPSK@6/9Mbps,QPSK@12/18Mbps,16-QAM@24Mbps,64-QAM@48/54Mbps
DSSS:DBPSK@1Mbps,DQPSK@2Mbps,and [email protected]/11Mbps
MIMO-OFDM:BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM
OFDMA (up to 1024-QAM)
Receiver Sensitivity
11b:-96dBm(1Mbps),-93dBm(5Mbps),-89dBm(11Mbps)
11a/g:-91dBm(6Mbps),-85dBm(24Mbps),-80dBm(36Mbps),-74dBm(54Mbps)
11n:-90dBm(MCS0),-70dBm(MCS7),-89dBm(MCS8),-68dBm(MCS15)
11ac HT20:-88dBm(MCS0), -63dBm(MCS9)
11ac HT40:-85dBm(MCS0), -60dBm(MCS9)
11ac HT80:-82dBm(MCS0), -57dBm(MCS9)
11ax HT80:-82dBm(MCS0), -57dBm(MCS9), -52dBm(MCS11)
Antenna
Integrated antenna design
Antenna Gain
2.4G: 3dBi
5G: 3dBi
Service Ports
1 10/100/1000M Ethernet ports, PoE In
Management Port
1 console port
Reset Button
Support
Anti-theft Lock
Support
LED Indicator
1 LED indicator (Support red, green, blue, orange and flashing mode, which indicates device access)
Transmit Power
≤100mw(20dBm) (vary depending on different countries)
Adjustable Power
1dBm
Power Supply
Local power supply (DC 48V/1A) (Power adapters are sold separately)
PoE (802.3af) – full spectrum operation
Power Consumption
<12.95W
Physical Specifications
Temperature
Operating Temperature: -10°C to 50°C
Storage Temperature: -40°C to 70°C
Humidity
Operating Humidity: 5% to 95% (non-condensing)
Storage Humidity: 5% to 95% (non-condensing)
Installation Mode
Ceiling/wall-mountable
Dimensions (W x D x H)
153mm ×193mm x26mm(Height of the AP only, excluding the mount kit)
Weight
≤0.5kg (include mount kit)
IP Rating
IP41
MTBF
250,000 hours
Certifications and Compliance
Wi-Fi Alliance
· Wi-Fi CERTIFIED™ a, b, g, n, ac
· Wi-Fi CERTIFIED 6™
· WPA3™-Enterprise, Personal
· Wi-Fi Enhanced Open™
· Wi-Fi Agile Multiband™
· WMM®
Safety Standard
GB4943, EN/IEC 62368-1
EMC Standard
GB9254, EN301 489
Radio Standard
SRRC, EN300 328, EN301 893
Software Specifications
WLAN
Maximum clients per AP - 1024
BSSID capacity - Up to 32
SSID hiding - Support
5G Priority (Band Steering) - Support
Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID - Support
Remote Intelligent Perception Technology (RIPT) - Support
Intelligent device recognition technology - Support
Intelligent load balancing based on the number of users or traffic - Support
STA control - SSID/radio-based
Bandwidth control - STA/SSID/AP-based bandwidth control
Data encryption - WPA(TKIP), WPA-PSK, WPA2(AES), WPA3, WEP(64/128 bits)
PSK and web authentication - Support
PPSK authentication (For Employee) - Support (require wireless controller)
802.1x authentication - Support
PEAP authentication - Support
Data frame filtering - Whitelist, static/dynamic blacklist
User isolation - Support
Rogue AP detection and countermeasure - Support
Dynamic ACL assignment - Support
RADIUS - Support
CPU Protection Policy (CPP) - Support
Network Foundation Protection Policy (NFPP) - Support
IP
IPv4 and IPv6 address
